TAM931

TAM931

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 8 Kbytes or 32 Kbytes

 Note:
TAM931 8K, memory: 8 Kbytes.
TAM931 32K, memory: 32 Kbytes.

 Sizes (lxwxh):
75mm x 50mm x 15mm.

Data sheet & User manual: 

Compatible product(s)

Transceiver

TCF932

TCF 932 is an R/W head allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

TCF100

TCF 100 is an R/W head allowing to exchange data with tags TAI or TAM without contact, using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

 

TCF18 MET

TCF18 MET is an R/W head allowing to exchange data with tags TAI or TAM without contact, using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

Monoblock reader

MOF100 ETH

Read/write Monoblock allowing to exchange data with RFID tags at 13.56MHz :

  • Tags TAI ... IC SLI using the standards 18000-3 mode 1 and ISO 15693 with a 26Kbits/s radiofrequency rate (mode ISO & extended ISO)
  • Tags TAM ... 2k/8k/32Ko have a 52Kbits/s rate and enable to exchange the data byte to byte (mode BALOGH 52Kb)
  • Tags TAI ... 2K FRAM have a 26/52Kbits/s rate (mode ISO 15693 26/52Kbps)

The mononblock has a communication module using Ethernet link. The industrial supported protocols are EtherNetIP®, Modbus TCP® and Balogh TCP/IP.

MOF100 PN

Read/write Monoblock allowing to exchange data with RFID tags at 13.56MHz :

  • Tags TAI ... IC SLI using the standards 18000-3 mode 1 and ISO 15693 with a 26Kbits/s radiofrequency rate (mode ISO & extended ISO)
  • Tags TAM ... 2k/8k/32Ko have a 52Kbits/s rate and enable to exchange the data byte to byte (mode BALOGH 52Kb)
  • Tags TAI ... 2K FRAM have a 26/52Kbits/s rate (mode ISO 15693 26/52Kbps)

MOF932 White

MOF 100 is an R/W Mono-Block allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

MOF932 M 485 white, with an RS-485 interface and in accordance with the food requirements.

Sizes (lxwxh):
75mm x 50mm x 20mm, without cable.

Interface

BPNF80

BPNF80 2 is a slave interface managing 2 independent read/write channels.

BPNF80 2  offers a PROFINET® Protocol.

The exchanges with the BPNF80 2 can be cyclics (maximum 512bytes/request) or acyclics (maximum 64Kbytes/request).

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software
Maintenance is carried out with the Web server.

BRMO80

BRMO 80 is a network interface system that can manage 2 up to 8 MOF RFID readers simultaneously. It can ensure automatic reads of UID (unique identifier) or 8 bytes in TAG memory.

BETF80

BETF80 2 is a slave interface managing 2 independent read/write channels.

BETF80 2  has multiple messaging protocols :
- EtherNet®/IP (Allen Bradley)
- MODBUS®/TCP to read (resp. write) 125 (resp.120) words per request
- TCP/IP + Balogh Protocol to read/write 8 Kbytes requests on both channels

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software. Maintenance is carried out with the Web server.

Tool for maintenance

MOBILE KIT LAPC FCIC

The MOBILE KIT LAPC FCIC is a portable lightweight unit with the ability to interface with the TAI 2K FRAM series and TAM 2K Read/Write TAGS

The data for this website are not contractual - The reuse of content (text, data, picture, etc..) Is prohibited without the written agreement from Balogh.