MOBILE KIT LAPC FCIC

MOBILE KIT LAPC FCIC

The MOBILE KIT LAPC FCIC is a portable lightweight unit with the ability to interface with the TAI 2K FRAM series and TAM 2K Read/Write TAGS

Data sheet & User manual: 

Compatible product(s)

Tag

TAM931

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 8 Kbytes or 32 Kbytes
TAM932

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 2 Kbytes or 8 Kbytes or 32 Kbytes

TAI20 IC SLI

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 4 bytes
  • Memory of 112 bytes of user data + UID
  • Passive (no power source embedded).

Interface

BPNF80

BPNF80 2 is a slave interface managing 2 independent read/write channels.

BPNF80 2  offers a PROFINET® Protocol.

The exchanges with the BPNF80 2 can be cyclics (maximum 512bytes/request) or acyclics (maximum 64Kbytes/request).

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software
Maintenance is carried out with the Web server.

BRMO80

BRMO 80 is a network interface system that can manage 2 up to 8 MOF RFID readers simultaneously. It can ensure automatic reads of UID (unique identifier) or 8 bytes in TAG memory.

BETF80

BETF80 2 is a slave interface managing 2 independent read/write channels.

BETF80 2  has multiple messaging protocols :
- EtherNet®/IP (Allen Bradley)
- MODBUS®/TCP to read (resp. write) 125 (resp.120) words per request
- TCP/IP + Balogh Protocol to read/write 8 Kbytes requests on both channels

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software. Maintenance is carried out with the Web server.

The data for this website are not contractual - The reuse of content (text, data, picture, etc..) Is prohibited without the written agreement from Balogh.