LAPC17 FCIC

LAPC17 FCIC

Lightweight and handy, the LAPC17 FCIC is a handheld peripheral for PDA, PPC or PC, aimed at reading/writing to/from tags type TAM and TAI in maintenance operations.

The host is in charge of parameterising the tag type.
It is connected to the host
• either through an RS-232 port by its male Sub-D9 connector,
• or through a USB port by its receptacle type B.
It is fitted with two leds:
• a red one (Power) lit when the LAPC is connected (Ready mode),
• a green one (Com) lit when a request is under processing.
Il is operated by two lithium 3.6 V batteries (LS 14500 manufactured by Saft) and protected against polarity reversals;
the red led blinks when the batteries run out (the LAPC is still serviceable).

Compatible product(s)

Tag

TAI20 IC SLI

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 4 bytes
  • Memory of 112 bytes of user data + UID
  • Passive (no power source embedded).

TAI50 IC SLI

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 4 bytes
  • Memory of 112 bytes of user data + UID
  • Passive (no power source embedded).

TAI20 2K FRAM

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 8 bytes
  • Memory of 2000 bytes of user data + UID
  • Passive (no power source embedded)

Interface

BPNF80

BPNF80 2 is a slave interface managing 2 independent read/write channels.

BPNF80 2  offers a PROFINET® Protocol.

The exchanges with the BPNF80 2 can be cyclics (maximum 512bytes/request) or acyclics (maximum 64Kbytes/request).

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software
Maintenance is carried out with the Web server.

BRMO80

BRMO 80 is a network interface system that can manage 2 up to 8 MOF RFID readers simultaneously. It can ensure automatic reads of UID (unique identifier) or 8 bytes in TAG memory.

BETF80

BETF80 2 is a slave interface managing 2 independent read/write channels.

BETF80 2  has multiple messaging protocols :
- EtherNet®/IP (Allen Bradley)
- MODBUS®/TCP to read (resp. write) 125 (resp.120) words per request
- TCP/IP + Balogh Protocol to read/write 8 Kbytes requests on both channels

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software. Maintenance is carried out with the Web server.

The data for this website are not contractual - The reuse of content (text, data, picture, etc..) Is prohibited without the written agreement from Balogh.