BRMO80

This product is present on many installations, mainly employed in the maintenance departments.

BRMO80

BRMO 80 is a network interface system that can manage 2 up to 8 MOF RFID readers simultaneously. It can ensure automatic reads of UID (unique identifier) or 8 bytes in TAG memory.

Note:

BRMO80 ETH-IP, Etherent IP
BRMO80 MB-TCP, Modbus-TCP
BRMO80 PRT, Profinet

Sizes (lxwxh):
210mm x 80.5mm x 40.5mm.

It could be configured into 3 modes :
- transparent => supervisor can send read/write commands to each reader through BRMO 80
- automatic => the read UID or memory sector is automatically returned to supervisor
- automatic/transparent => thanks a specific command supervisor can switch between the 2 previous modes Exchanges with supervisor are done over a Ethernet link (10/100 Mbauds) where EtherNet/IP protocol is used (managed by ODVA).
RFID readers network use a RS485 bus (at 57600 bauds without parity) with Modbus ® / Jbus ® protocol.

 

Compatible product(s)

Tag

TAM931

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 8 Kbytes or 32 Kbytes
TAM932

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 2 Kbytes or 8 Kbytes or 32 Kbytes

TAI20 IC SLI

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 4 bytes
  • Memory of 112 bytes of user data + UID
  • Passive (no power source embedded).

Monoblock reader

MOF100 ETH

Read/write Monoblock allowing to exchange data with RFID tags at 13.56MHz :

  • Tags TAI ... IC SLI using the standards 18000-3 mode 1 and ISO 15693 with a 26Kbits/s radiofrequency rate (mode ISO & extended ISO)
  • Tags TAM ... 2k/8k/32Ko have a 52Kbits/s rate and enable to exchange the data byte to byte (mode BALOGH 52Kb)
  • Tags TAI ... 2K FRAM have a 26/52Kbits/s rate (mode ISO 15693 26/52Kbps)

The mononblock has a communication module using Ethernet link. The industrial supported protocols are EtherNetIP®, Modbus TCP® and Balogh TCP/IP.

MOF100 PN

Read/write Monoblock allowing to exchange data with RFID tags at 13.56MHz :

  • Tags TAI ... IC SLI using the standards 18000-3 mode 1 and ISO 15693 with a 26Kbits/s radiofrequency rate (mode ISO & extended ISO)
  • Tags TAM ... 2k/8k/32Ko have a 52Kbits/s rate and enable to exchange the data byte to byte (mode BALOGH 52Kb)
  • Tags TAI ... 2K FRAM have a 26/52Kbits/s rate (mode ISO 15693 26/52Kbps)

MOF932 White

MOF 100 is an R/W Mono-Block allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

MOF932 M 485 white, with an RS-485 interface and in accordance with the food requirements.

Sizes (lxwxh):
75mm x 50mm x 20mm, without cable.

Accessory

BM12D RJ45 5M

Ethernet cable, equipped with M12D coded male 4pin connector and standard RJ45 plug.

CBL M12F5P 5M

Cord equipped with a M12 female, suitable for BALOGH's readers and/or interfaces

CDR5P M12 PUR

Connecting cable between a MOF and a BRMO, version IP69K, with connector Inox

Tool for maintenance

LPP2512 HF

The LPP 2512 HF is a portable lightweight unit with the ability to interface with the TAI IC SLI (112 bytes) Read/Write TAGS

MOBILE KIT LAPC FCIC

The MOBILE KIT LAPC FCIC is a portable lightweight unit with the ability to interface with the TAI 2K FRAM series and TAM 2K Read/Write TAGS

LAPC17 FCIC

Lightweight and handy, the LAPC17 FCIC is a handheld peripheral for PDA, PPC or PC, aimed at reading/writing to/from tags type TAM and TAI in maintenance operations.

The data for this website are not contractual - The reuse of content (text, data, picture, etc..) Is prohibited without the written agreement from Balogh.