BETF80

This product is present on many installations, mainly employed in the maintenance departments.

BETF80

BETF80 2 is a slave interface managing 2 independent read/write channels.

BETF80 2  has multiple messaging protocols :
- EtherNet®/IP (Allen Bradley)
- MODBUS®/TCP to read (resp. write) 125 (resp.120) words per request
- TCP/IP + Balogh Protocol to read/write 8 Kbytes requests on both channels

Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software. Maintenance is carried out with the Web server.

Note:
BETF80 2,  with an Ethernet connection.
BETF80 2D,  with two Ethernet connection.

Dimensions: 
210mm x 80mm x 40.5mm
Data sheet & User manual: 

Compatible product(s)

Tag

TAM931

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 8 Kbytes or 32 Kbytes
TAM932

Radiofrequency tag made up of a chip and an antenna.

  • 8 bytes blocks are read/written in compliance with the standards ISO 18000-3 mode 1 and ISO 15693:
  • Data could also be read/written in compliance with BALOGH 52kb protocol using the Mono-Block MOF family products
  • FRAM Memory: 2 Kbytes or 8 Kbytes or 32 Kbytes

TAI20 IC SLI

Radiofrequency tag, made up of an electronic chip and an antenna.

  • Based on ISO 15693 / 18000-3 Mode 1 standard
  • Data is addressed in blocks of 4 bytes
  • Memory of 112 bytes of user data + UID
  • Passive (no power source embedded).

Transceiver

TCF932

TCF 932 is an R/W head allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

TCF100

TCF 100 is an R/W head allowing to exchange data with tags TAI or TAM without contact, using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

 

TCF18 MET

TCF18 MET is an R/W head allowing to exchange data with tags TAI or TAM without contact, using a protocol compliant with the standards ISO 18000-3 mode 1 and ISO 15693.
It has to be linked up to a Balogh interface, chosen among fieldbus interfaces BIxx (slave).

Accessory

BM12D RJ45 5M

Ethernet cable, equipped with M12D coded male 4pin connector and standard RJ45 plug.

CBL M12F5P 5M

Cord equipped with a M12 female, suitable for BALOGH's readers and/or interfaces

Tool for maintenance

LPP2512 HF

The LPP 2512 HF is a portable lightweight unit with the ability to interface with the TAI IC SLI (112 bytes) Read/Write TAGS

MOBILE KIT LAPC FCIC

The MOBILE KIT LAPC FCIC is a portable lightweight unit with the ability to interface with the TAI 2K FRAM series and TAM 2K Read/Write TAGS

LAPC17 FCIC

Lightweight and handy, the LAPC17 FCIC is a handheld peripheral for PDA, PPC or PC, aimed at reading/writing to/from tags type TAM and TAI in maintenance operations.

The data for this website are not contractual - The reuse of content (text, data, picture, etc..) Is prohibited without the written agreement from Balogh.