Industry, Monoblock reader

The products BALOGH of the range INDUSTRY (or ORANGE range) are intended to be used for the identification and the traceability of the industrial process, or industrial logistics and the traceability of the supply chain. The ORANGE range is composed of important of labels RFID and many readers monoblocks or readers equipped with interfaces adapted to a great number of applications.

MBU1919

Compatible with European standards ISO / IEC 18000-C and EN 302 208, the reader UHF EPC CG2 referenced MBU1919 of BALOGH can read and write tags up to 6 m. This reader has a circular antenna and it interfaces with networks Modbus RTU, Modbus TCP or Ethernet TCP/IP.

MBU1919 H4

Compatible with European standards ISO / IEC 18000-C and EN 302 208, the reader UHF EPC CG2 referenced MBU1919 of BALOGH can read and write tags up to 6 m. This reader has a linear antenna horizontal and it interfaces with networks Modbus RTU, Modbus TCP or Ethernet TCP/IP.

MBU1919 V4

Compatible with European standards ISO / IEC 18000-C and EN 302 208, the reader UHF EPC CG2 referenced MBU1919 of BALOGH can read and write tags up to 6 m. This reader has a linear antenna vertical and it interfaces with networks Modbus RTU or Ethernet TCP/IP.

MOES201 M485 1338 + ANT201 1339

The MOES reader reads/writes ISO15693, ISO18000-3 and BALOGH electronic tags. With its connection and system intelligence, it directly manages inputs and outputs locally to the actuators without transiting via a supervisor.

The monoblock can be connected to a second reading station. Two RS485 interfaces are available with I/Os for chaining with other equipment on the network.

Available in both IP65 and IP69K versions, MOES monoblock readers integrate simply into existing infrastructures

MOF100

MOF 100 is an R/W Mono-Block allowing the exchange of data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

MOF100 1301

MOF 100 is an R/W Mono-Block allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

The R/W Mono-Block meets the food processing requirements:
• housing quality white polypropylene fiber reinforced food 30%
• connector IP69K stainless steel
• Stainless steel fastener insert
• To prevent food contamination the case identifier is engraved

MOF200

MOF 200 is an R/W Mono-Block allowing the exchange of data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ®.

MOF932

 

MOF 932 is an R/W Mono-Block allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

MOF932 White

MOF 100 is an R/W Mono-Block allowing to exchange data with tags TAI or TAM without contact,using a protocol compliant with the standards ISO 18000-3 mode 1 & ISO 15693.
Available messaging instructions: Modbus ® / Jbus ® .

MOF932 M 485 white, with an RS-485 interface and in accordance with the food requirements.

Sizes (lxwxh):
75mm x 50mm x 20mm, without cable.