BPNF80 2 is a slave interface managing 2 independent read/write channels.
BPNF80 2 offers a PROFINET® Protocol.
The exchanges with the BPNF80 2 can be cyclics (maximum 512bytes/request) or acyclics (maximum 64Kbytes/request).
Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software
Maintenance is carried out with the Web server.
BETF80 2 is a slave interface managing 2 independent read/write channels.
BETF80 2 has multiple messaging protocols :
- EtherNet®/IP (Allen Bradley)
- MODBUS®/TCP to read (resp. write) 125 (resp.120) words per request
- TCP/IP + Balogh Protocol to read/write 8 Kbytes requests on both channels
Product configuration services are made from an internal Web server or "Balogh Ethernet Setup" software. Maintenance is carried out with the Web server.
It handles up to two independent R/W channels (both simultaneously read / write data from / to Balogh tags);
the channels may differ from each other in tags type.
Authorized slave interface for ProfiBus® DP-V1: version BIDP170 M
Authorized slave interface for ProfiBus® DP-V0: version BIDP170
The CEPR 96/24 is a Eurocard-format programmable board featuring:
Both serial interfaces support the JBUS ®, UNITELWAY ®, 3964R ®, DF1 ® protocols.
The software is stored in a battery-backed RAM; programming by using the ST .LAD PC software.
Slave interface handling 2 independent R/W channels.
Exchanges occur over an Ethernet link (baud rate: 10 /100 Mbauds with autobaud).
BIET 170 supports several DIP-switch selectable messaging protocols: